- 6803 Parke East Blvd. Tampa, FL. 33610
- 800.728.4942
- 813-231-6305
$45.09
8 PC. XZN STUBBY DRIVER SET – 1/4″ DR. W/ MAGRAIL XZN4 THROUGH XZN12
8 PC. XZN STUBBY DRIVER SET – 1/4″ DR. W/ MAGRAIL XZN4 THROUGH XZN12
Satin Chrome plated, Impact Quality
Set assembled on a 4″ Magrail
S2 Steel, Fully Heat Treated
| Weight | 0.25 lbs |
|---|---|
| Dimensions | 3 × .5 × .5 in |
| Case Quantity | 5 |
| Bar Codes | 0-92308-24913 |
| Country Origin | Taiwan |
| Grade / Rating | |
| Drive | |
| Features | |
| Type | |
| Length |
You must be logged in to post a review.
All VIM tools carry a Limited Lifetime Warranty unless mentioned otherwise. Any tool that fails during normal use
will be repaired, replaced or a repair kit will be sent to you. Please note, consumables are not covered under warranty.
9M XZN Stubby Driver, 1/4″ square drive 20mm long
8 M XZN Stubby Driver, 1/4″ square drive 20mm long
7M XZN Stubby Driver, 1/4″ square drive 20mm long
6 M XZN Stubby Driver, 1/4″ square drive 20mm long
5 M XZN Stubby Driver, 1/4″ square drive 20mm long
4 M XZN Stubby Driver, 1/4″ square drive 20mm long
12 M XZN Stubby Driver, 1/4″ square drive 20mm long
10 M XZN Stubby Driver, 1/4″ square drive 20mm long
5/16″ Angle Wrench 15 X 80 degree flat profile open end wrench
5.5mm Angle Wrench 15 X 80 degree flat profile open end wrench
1/4″ Angle Wrench 15 X 80 degree flat profile open end wrench
11mm Angle Wrench 15 X 80 degree flat profile open end wrench
Reviews
There are no reviews yet.