- 6803 Parke East Blvd. Tampa, FL. 33610
- 800.728.4942
- 813-231-6305
$73.12
IMPACT Hex Driver Set, Inch 10 pc, Power or Hand Approved, 3/8″Sq. Drive
Out of stock
IMPACT Hex Driver Set, SAE 10 pc, Power or Hand Approved, 3/8″Sq. Drive
| Weight | 0.70 lbs |
|---|---|
| Dimensions | 6 × 3 × 2 in |
| Case Quantity | 5 |
| Bar Codes | 0-92308-93629 |
| Country Origin | Taiwan |
| Grade / Rating | |
| Drive | |
| Features | |
| Type | |
| Unit | |
| Length |
You must be logged in to post a review.
All VIM tools carry a Limited Lifetime Warranty unless mentioned otherwise. Any tool that fails during normal use
will be repaired, replaced or a repair kit will be sent to you. Please note, consumables are not covered under warranty.
19MM Stubbie One piece Impact driver, S2 steel, 1 .1 OAL (28MM)
17MM Stubbie One piece Impact driver, S2 steel, 1 .1 OAL (28MM)
14MM Stubbie One piece Impact driver, S2 steel, 1 .1 OAL (28MM)
13M Stubbie One Piece Impact Driver, 3/8″ Sq. Dr., S2, 28mm
12MM Stubbie One piece Impact driver, S2 steel, 1 .1 OAL (28MM)
11M Stubbie One Piece Impact Driver, 3/8″ Sq. Dr., S2, 28mm
10MM Stubbie One piece Impact driver, S2 steel, 1 .1 OAL (28MM)
8MM Stubbie One piece Impact driver, S2 steel, 1 .1 OAL (28MM)
7MM Stubbie One piece Impact driver, S2 steel, 1 .1 OAL (28MM)
6MM Stubbie One piece Impact driver, S2 steel, 1 .1 OAL ,(28MM)
9/32″ Angle Wrench 15 X 80 degree flat profile open end wrench
9/16″ Angle Wrench 15 X 80 degree flat profile open end wrench
14mm Angle Wrench 15 X 80 degree flat profile open end wrench
15mm Angle Wrench 15 X 80 degree flat profile open end wrench
Reviews
There are no reviews yet.