- 6803 Parke East Blvd. Tampa, FL. 33610
- 800.728.4942
- 813-231-6305
$85.00
IMPACT Half Cut Torx Driver Set 10 pc, Power or Hand Approved, 3/8″Sq. Drive
IMPACT Half Cut Torx Driver Set 10 pc, Power or Hand Approved, 3/8″Sq. Drive
| Weight | 0.70 lbs |
|---|---|
| Dimensions | 6 × 3 × 2 in |
| Case Quantity | 5 |
| Bar Codes | 0-92308-93683 |
| Country Origin | Taiwan |
| Grade / Rating | |
| Drive | |
| Features | |
| Type | |
| Length |
You must be logged in to post a review.
All VIM tools carry a Limited Lifetime Warranty unless mentioned otherwise. Any tool that fails during normal use
will be repaired, replaced or a repair kit will be sent to you. Please note, consumables are not covered under warranty.
MAGRAIL 8″ Black, No Studs
T60 Half Cut Torx, One Piece Impact Driver, 3/8″ Sq. Dr.
T55Half Cut Torx, One Piece Impact Driver, 3/8″ Sq. Dr.
T50 Half Cut Torx, One Piece Impact Driver, 3/8″ Sq. Dr.
T47Half Cut Torx, One Piece Impact Driver, 3/8″ Sq. Dr.
T45 Half Cut Torx, One Piece Impact Driver, 3/8″ Sq. Dr.
T40 Half Cut Torx, One Piece Impact Driver, 3/8″ Sq. Dr.
T30 Half Cut Torx, One Piece Impact Driver, 3/8″ Sq. Dr.
T27 Half Cut Torx, One Piece Impact Driver, 3/8″ Sq. Dr.
T25 Half Cut Torx, One Piece Impact Driver, 3/8″ Sq. Dr.
T20 Half Cut Torx, One Piece Impact Driver, 3/8″ Sq. Dr.
1/4″ Angle Wrench 15 X 80 degree flat profile open end wrench
3/8″ Angle Wrench 15 X 80 degree flat profile open end wrench
15mm Angle Wrench 15 X 80 degree flat profile open end wrench
“T” Handle SAE / inch, ball / hex,10pc set 1/8 thru 5/16, with case
Reviews
There are no reviews yet.