- 6803 Parke East Blvd. Tampa, FL. 33610
- 800.728.4942
- 813-231-6305
$106.06
39 PC. INTERCHANGEABLE RATCHETING SCREWDRIVER SET
39 PC. INTERCHANGEABLE RATCHETING SCREWDRIVER SET
| Weight | 1 lbs |
|---|---|
| Dimensions | 12 × 8 × 3 in |
| Other |
You must be logged in to post a review.
All VIM tools carry a Limited Lifetime Warranty unless mentioned otherwise. Any tool that fails during normal use
will be repaired, replaced or a repair kit will be sent to you. Please note, consumables are not covered under warranty.
Out of stock
1/4” HEX DR. STUBBY REVERSIBLE RATCHETING SCREWDRIVER – 72T
MAGNETIC BIT HOLDER – 2 PACK GREEN & BLUE
Out of stock
1/4” MAGNETIC BIT HOLDER BLADE
T30 TORX SCREWDRIVER BLADE
T20 TORX SCREWDRIVER BLADE
T15 TORX SCREWDRIVER BLADE
PH2 PHILLIPS SCREWDRIVER BLADE
MT2 MORTORQ BIT, 1/4” HEX DR X 1”L
R2 SQUARE – ROBERTSON BIT, 1/4” HEX DR X 1”L
IP30 TORX PLUS BIT, 1/4” HEX DR X 1”L
IP27 TORX PLUS BIT, 1/4” HEX DR X 1”L
IP25 TORX PLUS BIT, 1/4” HEX DR X 1”L
IP20 TORX PLUS BIT, 1/4” HEX DR X 1”L
IP15 TORX PLUS BIT, 1/4” HEX DR X 1”L
IP10 TORX PLUS BIT, 1/4” HEX DR X 1”L
5.5MM METRIC HEX BIT, 1/4” HEX DR X 1”L
PA2 PHILLIPS ACR BIT – 1/4” HEX DR X 1”L
5mm Hex Insert bit, 1/4″ hex shank, 1″ long, natural finish
4mm Hex Insert bit, 1/4″ hex shank, 1″ long, natural finish
3mm Hex Insert bit, 1/4″ hex shank, 1″ long, natural finish
3/16″ Hex Insert bit, 1/4″ hex shank, 1″ long, natural finish
2mm Hex Insert bit, 1/4″ hex shank, 1″ long, natural finish
2.5mm Hex Insert bit, 1/4″ hex shank, 1″ long, natural finish
1/8″ Hex Insert bit, 1/4″ hex shank, 1″ long, natural finish
5MM FLAT-HEAD BIT , 1/4” HEX DR X 1”L
3MM FLAT-HEAD BIT , 1/4” HEX DR X 1”L
P2 PHILLIPS SCREWDRIVER BIT X 1/4” HEX, 1” LONG
P1 PHILLIPS SCREWDRIVER BIT X 1/4” HEX, 1” LONG
5/32” FLAT TIP SCREWDRIVER BIT X 1/4” HEX, 1” LONG
T30 TORX® BIT X 1/4” HEX SHANK, 1” LONG
T27 TORX® BIT X 1/4” HEX SHANK, 1” LONG
T25 TORX® BIT X 1/4” HEX SHANK, 1” LONG
T20 TORX® BIT X 1/4” HEX SHANK, 1” LONG
T15 TORX® BIT X 1/4” HEX SHANK, 1” LONG
T10 TORX® BIT X 1/4” HEX SHANK, 1” LONG
1/4″ Angle Wrench 15 X 80 degree flat profile open end wrench
16mm Angle Wrench 15 X 80 degree flat profile open end wrench
12mm Angle Wrench 15 X 80 degree flat profile open end wrench
“T” Handle SAE / inch, ball / hex,10pc set 1/8 thru 5/16, with case
Reviews
There are no reviews yet.