- 6803 Parke East Blvd. Tampa, FL. 33610
- 800.728.4942
- 813-231-6305
$53.20
Master Ball Set, Ball TORX® T10 thru T55, Ball hex SAE 3/32″ thru 3/8″, Ball Hex Metric 2M-10M
Out of stock
Master Ball Set, Ball TORX® T10 thru T55, Ball hex SAE 3/32″ thru 3/8″, Ball Hex Metric 2M-10M
| Weight | 0.61 lbs |
|---|---|
| Dimensions | 3 × 3 × 2 in |
| Case Quantity | 6 |
| Bar Codes | 0-92308-11203 |
| Country Origin | Taiwan |
| Grade / Rating | |
| Drive | |
| Type | |
| Length |
You must be logged in to post a review.
All VIM tools carry a Limited Lifetime Warranty unless mentioned otherwise. Any tool that fails during normal use
will be repaired, replaced or a repair kit will be sent to you. Please note, consumables are not covered under warranty.
T55 BALL TORX® BIT X 1/4” HEX DRIVE X 1” LONG
T50 BALL TORX® BIT X 1/4” HEX DRIVE X 1” LONG
T45 BALL TORX® BIT X 1/4” HEX DRIVE X 1” LONG
T40 BALL TORX® BIT X 1/4” HEX DRIVE X 1” LONG
Out of stock
T30 BALL TORX® BIT X 1/4” HEX DRIVE X 1” LONG
T27 BALL TORX® BIT X 1/4” HEX DRIVE X 1” LONG
T25 BALL TORX® BIT X 1/4” HEX DRIVE X 1” LONG
T20 BALL TORX® BIT X 1/4” HEX DRIVE X 1” LONG
T15 BALL TORX® BIT X 1/4” HEX DRIVE X 1” LONG
T10 BALL TORX® BIT X 1/4” HEX DRIVE X 1” LONG
1/4″ Hex Magnetic Driver, 1/4″ hex shank
1/4″ MAGNETIC BIT HOLDER, 1/4” SQ. DR.
2M BALL HEX BIT 1/4” HEX DRIVE X 1” LONG
2.5M BALL HEX BIT 1/4” HEX DRIVE X 1” LONG
3/16” BALL HEX BIT 1/4” HEX DRIVE X 1” LONG
9M BALL HEX BIT 1/4” HEX DRIVE X 1” LONG
8M BALL HEX BIT 1/4” HEX DRIVE X 1” LONG
7M BALL HEX BIT 1/4” HEX DRIVE X 1” LONG
6M BALL HEX BIT 1/4” HEX DRIVE X 1” LONG
5M BALL HEX BIT 1/4” HEX DRIVE X 1” LONG
4M BALL HEX BIT 1/4” HEX DRIVE X 1” LONG
3M BALL HEX BIT 1/4” HEX DRIVE X 1” LONG
10M BALL HEX BIT 1/4” HEX DRIVE X 1” LONG
1/4” BALL HEX BIT 1/4” HEX DRIVE X 1” LONG
7/32” BALL HEX BIT 1/4” HEX DRIVE X 1” LONG
5/32” BALL HEX BIT 1/4” HEX DRIVE X 1” LONG
9/64” BALL HEX BIT 1/4” HEX DRIVE X 1” LONG
1/8” BALL HEX BIT 1/4” HEX DRIVE X 1” LONG
7/64” BALL HEX BIT 1/4” HEX DRIVE X 1” LONG
3/8” BALL HEX BIT 1/4” HEX DRIVE X 1” LONG
5/16” BALL HEX BIT 1/4” HEX DRIVE X 1” LONG
3/32” BALL HEX BIT 1/4” HEX DRIVE X 1” LONG
9/16″ Angle Wrench 15 X 80 degree flat profile open end wrench
1/4″ Square Drive adapter with 1/4″ Hex shank for HBR12 and RST4
10mm Angle Wrench 15 X 80 degree flat profile open end wrench
11mm Angle Wrench 15 X 80 degree flat profile open end wrench
Reviews
There are no reviews yet.